In order to connect a compatible NI device (see 'Compatible NI Devices' table above) with a 30-pin-type iOS device model, you need to purchase the Apple iPad Camera Connection Kit. Apple iPad Camera Connection Kit (Required by a Compatible NI Device) You can purchase a replacement 30-pin cable here. In order to connect a fully supported NI device (see 'Fully Supported NI Devices' table above) with a 30-pin-type iOS device model, you must use the NI USB to 30-pin (Mini-USB to 30-pin for TRAKTOR AUDIO 2 MK2) cable. The following iOS device models are equipped with a 30-pin connector:ģ.2.1 USB to 30-Pin Cable (Required by a Fully Supported NI Device) iOS Devices Equipped with a 30-Pin Connector Find more info about identifying fake adapters here on the Apple support pages. Important Note: We only support original Apple adapters, which are available at the Apple Store or authorized Apple retailers. Third-party or fake adapters will not work properly. You can find this cable in most Apple retail stores or order it from the Apple Store. In order to connect a compatible NI device (see 'Compatible NI Devices' table above) with a Lightning-type iOS device model, you need to purchase the Apple Lightning to USB Camera Adapter. Apple Lightning to USB Camera Adapter (Required by a Compatible NI Device) If needed you can purchase replacement cables here. In order to connect a fully supported NI device (see 'Fully Supported NI Devices' table above) with a Lightning-type iOS device model, you must use the provided NI USB to Lightning (Mini-USB to Lightning for TRAKTOR AUDIO 2 MK2) cable. USB to Lightning Cable (Required by a Fully Supported NI Device) The following iOS device models are equipped with a Lightning connector:ģ.1.1. iOS Devices Equipped with a Lightning Connector New devices with USB-C ports will require and adapter which can be purchased from Apple here. If you need to connect your device to an older iOS device model equipped with a 30-pin connector, you can purchase the USB to 30-pin (or Mini USB to 30-pin) replacement cable here. Note: All fully supported NI devices (see 'Fully Supported NI Devices' table above) currently include a USB to Lightning (or Mini USB to Lightning) cable. ![]() Below we specify which adapter cable is required for your specific device and iOS model. Note: These devices can only be used as audio interfaces on any iOS app capable of streaming audio (including TRAKTOR DJ) but not as controllers for the TRAKTOR DJ app.īelow is a list of all compatible NI class-compliant devices and their specifications regarding the use of a power supply.Īll NI devices require an iOS adapter cable in order to establish a connection with an iOS device.ĭepending on the iOS device generation you use and the NI device type you wish to connect to, different iOS adapter cables are required. Compatible NI DevicesĬompatible NI devices can only be used with iPad.Īn iOS adapter cable needs to be purchased separately for these devices (see 'iOS Device Requirements' below). If you do not have a (required) power supply for your device, you can purchase one here. †Note: the TRAKTOR KONTROL S2 MK3 and S3 require iOS 11.0 or later, compatible with iPad 5th generation or later, iPad Air 1st generation or later, iPad mini 2nd generation or later, and iPad Pro 1st generation or later. *Note: TRAKTOR AUDIO 2 MK2 is not compatible with 2018 models of iPad which has a USB-C type port. For further software settings please refer to the Manuals of VirtualDJ 8.Mini-USB to Lightning cable not included Alternative Audio setups can be applied in the same window. Find more details at VDJ Pedia AUDIO Setup The unit has a pre-defined Audio setup and a special button in the AUDIO tab of Config to provide that. The factory default Mapping offers the functions described in this Manual, however those can be adjusted to your needs via VDJ Script actions. Advanced Setup MIDI Operation The unit should be visible in the CONTROLLERS tab of Config and the “factory default” available/selected from the Mappings drop-down list. Buy a license A detection window will appear next, verifying that the device is properly connected. A Pro Infinity or a Pro Subscription License is required to fully use the Kontrol S4MK2 Without any of the above Licenses, the controller will operate for 10 minutes each time you restart VirtualDJ. Native Instruments - Kontrol S4 MKII INSTALLATION Firmware & Drivers Firmware: Firmware: Update the firmware of the unit to the latest version from Native Instruments Drivers: Install the latest drivers from Native Instruments VirtualDJ 8 Setup Download and install VirtualDJ 8 from our Downloads Page (in case you have not done already) Once VirtualDJ 8 is launched, a Login Window will appear.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |